The Origin of Primary Cosmic Rays: Constraints from ACE Elemental and Isotopic Composition Observations

Cosmic-ray isotope observations from NASAs Advanced Composition Explorer (ACE) mission have been used to investigate the composition of cosmic-ray source material. Source abundances relative to ⁵⁶Fe are reported for eleven isotopes of Ca, Fe, Co, and Ni, including the very rare isotopes ⁴⁸Ca and ⁶⁴Ni. Although the source abundances range over a factor 10⁴, most of the ratios to ⁵⁶Fe are consistent with solar-system values to within 20%. However, there are some notable differences, the most significant being an excess of (70±30)% relative to the solar system for the cosmic-ray source ratio ⁵⁸Fe/⁵⁶Fe. The possible association of such an excess with a contribution to the cosmic-ray source from Wolf–Rayet star ejecta is discussed.     

Radioactive Clocks and Cosmic-ray Transport in the Galaxy

There are a number of radioactive clocks in the cosmic radiation that can be used to measure the time scales for cosmic ray processes in the Galaxy. With high-resolution isotope measurements available from ACE it is now possible to read these clocks with greatly improved accuracy and address key questions about the origin and lifetime of cosmic rays. This paper discusses the status of three such investigations.     

Resolution Needed for an Adequate Determination of the Mean Ocean Circulation from Altimetry and an Improved Geoid

The sea surface topography observed by satellite altimetry is a combination of the geoid and of the ocean dynamic topography. Satellite altimetry has thus the potential to supply quasi-global maps of mean sea surface heights from which the mean geostrophic surface ocean currents can be derived, provided that the geoid is known with a sufficient absolute accuracy. At present, however, given the limited accuracy of the best available geoid, altimetric mean sea surface topographies have been derived only up to degree 15 or so, i.e. for wavelengths of approximately 2000 km and larger. CHAMP, GRACE, and the future GOCE missions are dedicated to the improvement of the Earth's gravity field from space. Several studies have recently investigated the impact of these improvements for oceanography, concluding to reductions of uncertainties on the oceanic flux estimates as large as a factor of 2 in the regions of intense an narrow currents. The aim of this paper is to focus on what are the typical horizontal scales of the mean dynamic topography of the ocean, and to compare their characteristics to the error estimates expected from altimetry and these future geoids. It gives also an illustration of the oceanic features that will be resolved by the combination of altimetry and the GRACE and GOCE geoids. It further reassesses the very demanding requirements in term of accuracy and resolution agreed in the design of these new gravity missions for ocean science applications. The present study relies on recent very high-resolution numerical Ocean General Circulation Model simulations. This revised version was published online in August 2006 with corrections to the Cover Date.     

The Aouda.X space suit simulator and its applications to astrobiology

We have developed the space suit simulator Aouda.X, which is capable of reproducing the physical and sensory limitations a flight-worthy suit would have on Mars. Based upon a Hard-Upper-Torso design, it has an advanced human-machine interface and a sensory network connected to an On-Board Data Handling system to increase the situational awareness in the field. Although the suit simulator is not pressurized, the physical forces that lead to a reduced working envelope and physical performance are reproduced with a calibrated exoskeleton. This allows us to simulate various pressure regimes from 0.3-1 bar. Aouda.X has been tested in several laboratory and field settings, including sterile sampling at 2800 m altitude inside a glacial ice cave and a cryochamber at -110°C, and subsurface tests in connection with geophysical instrumentation relevant to astrobiology, including ground-penetrating radar, geoacoustics, and drilling. The communication subsystem allows for a direct interaction with remote science teams via telemetry from a mission control center. Aouda.X as such is a versatile experimental platform for studying Mars exploration activities in a high-fidelity Mars analog environment with a focus on astrobiology and operations research that has been optimized to reduce the amount of biological cross contamination. We report on the performance envelope of the Aouda.X system and its operational limitations.     

A hybrid,self-adjusting search algorithm for optimal space trajectory design

The aim of the present paper is to propose a hybrid, self adjusting, search algorithm for space trajectory optimization. By taking advantage of both direct and indirect methods, the present algorithm allows the finding of the optimal solution through the introduction of some new control parameters, whose number is smaller than that of the Lagrange multipliers, and whose range is bounded. Eventually, the optimal solution is determined by means of an iterative self-adjustment of the search domain occurring at “runtime”, without any correction by an external user. This new set of parameters can be found through a reduction process of the degrees of freedom, obtained through the transversality conditions before entering the search loop. Furthermore, such a process shows that Lagrange multipliers are subject to a deep symmetry mirroring the features of the state vector. The algorithm reliability and efficiency is assessed through some test cases, and by reproducing some optimal transfer trajectories: a full three-dimensional, minimum time Mars mission, an optimal transfer to Jupiter, and finally an injection into a circular Moon orbit.     

Identification of morphological biosignatures in Martian analogue field specimens using in situ planetary instrumentation

We have investigated how morphological biosignatures (i.e., features related to life) might be identified with an array of viable instruments within the framework of robotic planetary surface operations at Mars. This is the first time such an integrated lab-based study has been conducted that incorporates space-qualified instrumentation designed for combined in situ imaging, analysis, and geotechnics (sampling). Specimens were selected on the basis of feature morphology, scale, and analogy to Mars rocks. Two types of morphological criteria were considered: potential signatures of extinct life (fossilized microbial filaments) and of extant life (crypto-chasmoendolithic microorganisms). The materials originated from a variety of topical martian analogue localities on Earth, including impact craters, high-latitude deserts, and hydrothermal deposits. Our in situ payload included a stereo camera, microscope, M?ssbauer spectrometer, and sampling device (all space-qualified units from Beagle 2), and an array of commercial instruments, including a multi-spectral imager, an X-ray spectrometer (calibrated to the Beagle 2 instrument), a micro-Raman spectrometer, and a bespoke (custom-designed) X-ray diffractometer. All experiments were conducted within the engineering constraints of in situ operations to generate realistic data and address the practical challenges of measurement. Our results demonstrate the importance of an integrated approach for this type of work. Each technique made a proportionate contribution to the overall effectiveness of our "pseudopayload" for biogenic assessment of samples yet highlighted a number of limitations of current space instrument technology for in situ astrobiology.     

真实的精度

机床制造者在制造机器时,总离不开一个极敏感的因素,即定位精度。在考虑整个实体的精度时,它是一个复杂的问题,涉及各个工作轴和参考点距离等问题。为了用激光检测加工中心的真实定位精度和重复精度,DIXI公司生产了DHP80系列和最新坐标镗加工中心JIG1200。按照VDI3441标准,实现恒温控制,机床无论是空载还是加工状态,都要有效地达到双向测量定位精度小于或等于3μm,在整个加工区域1m3的范围内均可达到精度要求,即实体精度。下面通过所采用的方法来证明这个精度的真实性。误差的放大。首先,应注意机床上可能安放几个测量位置,如果测量点…     

Analysis of Regolith Properties Using Seismic Signals Generated by InSight’s HP<Superscript>3</Superscript> Penetrator

InSight’s Seismic Experiment for Interior Structure (SEIS) provides a unique and unprecedented opportunity to conduct the first geotechnical survey of the Martian soil by taking advantage of the repeated seismic signals that will be generated by the mole of the Heat Flow and Physical Properties Package (HP³). Knowledge of the elastic properties of the Martian regolith have implications to material strength and can constrain models of water content, and provide context to geological processes and history that have acted on the landing site in western Elysium Planitia. Moreover, it will help to reduce travel-time errors introduced into the analysis of seismic data due to poor knowledge of the shallow subsurface. The challenge faced by the InSight team is to overcome the limited temporal resolution of the sharp hammer signals, which have significantly higher frequency content than the SEIS 100 Hz sampling rate. Fortunately, since the mole propagates at a rate of \(\sim1~\mbox{mm}\) per stroke down to 5 m depth, we anticipate thousands of seismic signals, which will vary very gradually as the mole travels.Using a combination of field measurements and modeling we simulate a seismic data set that mimics the InSight HP3-SEIS scenario, and the resolution of the InSight seismometer data. We demonstrate that the direct signal, and more importantly an anticipated reflected signal from the interface between the bottom of the regolith layer and an underlying lava flow, are likely to be observed both by Insight’s Very Broad Band (VBB) seismometer and Short Period (SP) seismometer. We have outlined several strategies to increase the signal temporal resolution using the multitude of hammer stroke and internal timing information to stack and interpolate multiple signals, and demonstrated that in spite of the low resolution, the key parameters—seismic velocities and regolith depth—can be retrieved with a high degree of confidence.     

Planning for the Global Earth Observation System of Systems (GEOSS)

The Group on Earth Observations was established to promote comprehensive, coordinated, and sustained Earth observations. Its mandate is to implement the Global Earth Observation System of Systems (GEOSS) in accord with the GEOSS 10-Year Implementation Plan and Reference Document. During the months over which the GEOSS Implementation Plan was developed, many issues surfaced and were addressed. This article discusses several of the more interesting or challenging of those issues—e.g. fitting in with existing organizations and securing stable funding—some of which have yet to be resolved fully as of this writing. Despite the relatively short period over which the Implementation Plan had to be developed, there is a good chance that the work undertaken will be influential for decades to come.